The mouldline remover tool is used to remove mould lines from Games Workshop miniatures. Just draw the tool along the mould lines to easily scrape them away and prepare your miniatures for undercoating.  

Key Features Drill tiny holes in the barrels of your tiny guns, and pin small parts in place Ergonomic design incorporates a number of safety features Includes four drill bits in two sizes, perfect for a wide range of models, including a storage container Do you want to drill tiny holes in your miniature gun barrels so they look like they could fire miniature bullets? Want to experiment with pinning hard-to-fix pieces in place when building and converting your miniatures? A reliable drill suitable for use on miniatures can be used in all manner of ways, and the Citadel Tools design team were eager to take on the challenge of redesigning the hobby drill to make it easier and safer to use by incorporating a number of design features:– Designed primarily in a light-weight hard plastic to reduce hand fatigue– Ergonomic shape incorporating ridges and grooves increases control and allows you to safely exert pressure– Bit-securing barrel is recessed into the handle, so it won’t unscrew during use– Freely rotating end cap allowing you to push down gently and rotate at the same time– Includes four bits in two sizes, perfect for a wide variety of Citadel model kits, stored in their own container when not in use

Key Features Hobby knife with advanced safety features Ergonomic, weighted handle for a sturdy feel Allows maximum precision and control Every Warhammer hobbyist needs a hobby knife, so the Citadel Tools design team created one just for them. It features a fully sculpted hard plastic handle, and incorporates a number of clever features for safety and convenience: – Fixed single slot blade barrel, ensuring perfect alignment– Ribbed shroud behind the blade, allowing safer downward pressure and maximum precision– Ergonomic handle to reduce hand fatigue, and prevent rolling on your desk– Back-weighted design, so it’s less likely to fall with the blade down– Blade changing thread recessed into the handle so the blade doesn’t loosen during use– Blade cap The Citadel Tools Knife also comes with a pack of six replacement blades in a container.

Key Features Cutters designed to remove plastic components from the frame Ultra slim blades and a flush back help achieve close and controlled cuts Long handles and rubberised ergonomic grip require less force and reduce fatigue Modern Citadel plastic kits are packed with details, extras, and add-on bits, including some very small pieces. The Citadel Tools design team had these fine details in mind when they redesigned the beloved cutters used by so many Warhammer hobbyists. This new set of Super Fine Detail Cutters includes a number of improved features:– Ultra thin blades (about three times smaller than the previous model) allow you to get into tight spaces with ease, increasing visibility and control– Blades meet perfectly flush on the back, reducing the amount of additional cleanup needed and reducing the risk of pieces pinging away when used properly– Bump-stopping design makes it impossible to mash the blades together with too much pressure, which means they’ll stay sharp for longer– Rubberised contoured handles, including flares near the blades for added control, precision, and safety.– Extended handles to reduce the pressure required to make a cut, reducing hand fatigue

Key Features Securely holds fiddly bits in place while you work Makes it easier to paint small, vital components, like heads and weapons, before completing assembly of the final model Compatible with a wide range of Citadel Colour painting accessories The Citadel Colour Sub-assembly Holder contains 44 expertly-designed Part Holders. They’re made of the same plastic as Citadel models, which means you can drill small holes or use glue to attach the pegs, before simply clipping the bits off when you’re finished. You’ll also get two fluted bases for the Part Holders, which fit neatly into the Citadel Colour Painting Handle for comfortable painting sessions. Go on and paint those eyeballs! The Citadel Colour Sub-assembly Holder kit has been expertly designed to work with a range of modular hobby tools to enhance your painting and modelling experience. It’s the lynchpin of a sub-assembly painting process, as the Part Holders fit neatly into the circular sockets found on the Citadel Colour Spray Stick, Painting Handle XL, and Assembly Stand. This allows you to keep a consistent colour and finish when painting components separately from the rest of the model, and it also gives you the tools you need to manage and organise sprawling, complicated projects. It’s the solution you never knew you needed. Miniatures displayed in images are for scale purposes only and are not included with this product.

Key Features Creates a strong, stable base to hold your painting handle and keep your hobby table organised Flexible assembly arms with rubber grips hold miniature components while the glue dries Modular design is compatible with a wide range of Citadel Colour painting accessories The Citadel Colour Assembly Stand has been expertly designed to work with a range of modular hobby tools to enhance your painting and modelling experience. This wide, stable base features a snug holder to keep a Painting Handle or Painting Handle XL secure and safe while you work. You’ll also find two flexible yet sturdy assembly arms with rubberised jaws to hold components in place while the glue cures, making assembly easier than ever. Several shallow trays along the base allow you to collect the various bits and bobs that tend to pile up as you work. The arms are removable, allowing you to move them to any of the many circular sockets located around the base. The arms have been designed to fit in matching sockets on the Painting Handle XL for comfortably building the largest miniatures. The same sockets you find on this base are also sized to accommodate Sub-assembly Holders, so even the most sprawling projects stay organised and contained. This assembly base is compatible with the newer, ergonomic design of the Citadel Colour Painting Handle, and the older decagonal handle will not fit in the central holder. While you can find matching sockets on the updated Citadel Colour Spray Stick, continued use of canned sprays can degrade the rubber on the assembly arms, so we don’t recommend using them during your priming sessions. Miniatures displayed in images are for scale purposes only and are not included with this product.

Perfect for precision modelling and conversion, designed to cut through resin and plastic quickly, cleanly and efficiently, the Citadel Saw is for those hobbyists wishing to take their miniatures to the next level. Made from steel and aluminium, it’s designed with safety in mind – shaped so it won’t roll across the table.    It comes with 6 included hard-wearing blades:   - 2 small detail blades, with a snub-nosed design for getting into the tricky nooks and crannies of our more detailed models; - 2 standard blades, designed for use on most of our kits; - 2 heavy duty blades – cut up scenery, hack open a Land Raider! These blades are for drastic changes to large kits.   These blades are easy to swap out, and the Citadel Saw is compatible with the most common hobby saw blades.

The perfect tool to use when assembling some of our more complex miniatures, the Citadel Assembly Handle is designed to hold components securely in place while glue takes hold. Sometimes, a tiny component can require holding in place for several minutes as the glue dries – the soft, spring-loaded clamps found on this tool can be manipulated on their ball and socket joints into virtually any position, freeing up your hands to move onto clipping the next piece off its sprue ready for action. These clamps can be used to grip individual pieces as you pre-paint them, too!The handle itself is exactly the same as our Citadel Painting Handle, and features a spring-loaded mechanism which accepts round bases up to 40mm and oval bases up to 60mm – once the glue has dried, just remove the clamps and use the handle to hold your miniature securely as you paint!

Some of our models feature some rather small components, which can prove tricky to glue into place by hand. Citadel Tweezers are the perfect solution – featuring an all-metal construction and designed with a wide, flat 3mm contact point, they help you to grip small components and hold them firmly in place for the few seconds needed for the glue to take hold.

Designed specifically for assembling plastic Citadel miniatures, Citadel Plastic Glue comes in a bottle with a handy applicator nozzle, making it as easy as possible to put your models together. 

Ever had a disaster befall one of your miniatures when far from home? Perhaps your clumsy opponent knocked your Wraithknight over, or an enthusiastic dice roll snapped off your Dunecrawler’s antennae – the Miniature Repair Kit is the perfect tool for maintaining and, well, repairing your miniatures at short notice!   Presented in a handy form factor which can be clipped to your key ring, this is a two-part tool – one side is designed to hold a tube of Citadel Super Glue (not included), and the other is a sturdy metal scraper, designed for removing dried glue so that fresh glue can be placed. It’s a life (well, miniature) saver!

The Citadel Hobby Drill is used for pinning together parts of Citadel miniatures that may need a little extra support, like securing the huge skeletal wings of the Zombie dragon onto it’s body. It is also great for creating holes in gun barrels and it is supplied with six drill bits in three different sizes: lasgun size, bolter and heavy bolter size. 

Citadel Super Glue is specifically designed for the assembly of metal and resin Citadel and Forge World miniatures. This glue is supplied in five 0.5g aluminium tubes, to be used as needed.

Files are used to remove the small imperfections that may be created when you cut the model from it’s frame. This set contains two files; one rough and one fine. Both are half round in shape and feature a fine point, enabling you to file down and polish your miniature to a perfect finish. 

Green Stuff is a two-part modelling putty that is useful for filling in gaps on models and sculpting additional details. When the two colours are mixed together, they form a malleable putty that can be applied to plastic, resin and metal miniatures and then moulded into shape using a Citadel Sculpting Tool. Once it has fully cured, Green Stuff is solid enough to glue other components to and can be painted over using Citadel Paints.   This pack contains 20g of Green Stuff Modelling Putty.