MODIMOLD INSTANT MOLD
This Modifx Modimold blister pack contains five (5) sticks of Modimold.
Replicate any part you can get your hands on!
1) Immerse stick/s in hot water until soft
2) Remove stick/s for water and let excess water run off
3) Press the part you want to replicate into the soft Modimold
4) Leave to cool and harden
5) Carefully remove master part for the mold
6) Use Green Stuff or other putty to create duplicates
Tips and Tricks
For single side molds (where one side of the part to be duplicated is flat, like a miniatures base. Use an ordinary flat kitchen tile. Put the piece to be duplicated on top, flat side on the tile. Push the Modimold around the piece.
For duel sided molds
We found the easiest way to continually duplicate the piece is to make a little box (we made ours out of lego) with no top or bottom, just slightly bigger than the piece to be duplicated. Start by just duplicating the bottom half of the piece, let it harden then put the Modimold on top to duplicate the top half. The box makes it much easier to locate the two molds continually. The most difficult process is working out how much putty to put into each side of the mold.
Related Products
TYRANIDS: LICTOR
Key Features
A terrifying ambush assassin to hunt high-value targets for your Tyranids
Strike fear into foes and spring from the shadows with wicked mantis-like talons
Pose your Lictor to lunge, lurk, or loom, with loads of different ways to build
Lictors are a sinister adaptation of the Tyranid Warrior bioform, specialising in infiltration, scouting, and assassination. Hidden by their chameleonic skin, these vanguard beasts stalk their prey beyond the reach of the Hive Mind's synaptic web, leading the greater swarm to fresh targets with a potent pheromone trail. Lictors pick off their prey opportunistically, always looking for a chance to crack open an unwary skull and use their feeder tendrils to suck out the secrets within.
This multipart plastic kit builds a Lictor, a fearsome Tyranid ambush predator. This cunning creature lunges from shadows and darts up sheer vertical surfaces to tear foes apart, striking with its distinctive mantis-like talons. The Lictor's feeder tendrils allow it to even digest a victim's memories, and the kit includes two different heads – one with trailing feeder tendrils, the other with its tendril membrane aggressively flared.
This massively customisable monstrosity uses a variety of interchangeable legs, clawed arms, and scenic basing elements to create different poses for creeping across the battlefield – build your Lictor in a hunched stalk, braced to pounce, or looming ominously upright. Joints in its neck and scything talons allow you to adjust the pose even further, and extend or retract every element of its wickedly bladed arms.
This kit comprises 56 plastic components, and comes with a Citadel 50mm Round Base. This miniature is supplied unpainted and requires assembly.
$90.00
1 in stock
CITIES OF SIGMAR: FUSIL-MAJOR ON OGOR WARHULK
Key Features
A mobile watchtower and gun platform for your Cities of Sigmar army
Pick off foes from afar with crack shots, then smash them up close
Customise your mighty duo with different heads and poses
Fusil-Majors borne into battle by Ogor Warhulks forming the mobile watchtowers of a Castelite formation, using their lumbering vantage points to spy weaknesses in the enemy line and direct the fire of friendly forces. The obvious threat posed by a massive ogor carrier is usually enough to make any foe think twice about storming a Fusil-Major's fortified position.
This multipart plastic kit builds one Fusil-Major on Ogor Warhulk – an expert gunnery officer, carried aloft by a brutish companion. The Fusil-Major watches the battlefield from atop their crow's nest, which bristles with gargoyles, blessings, and a lantern, picking off foes at range with a long-barrelled fusil musket. Their Ogor Warhulk lays into enemies with a heavy mace, striding to new firing positions before using a massive shield to barricade foes.
This kit includes a choice of two heads for the Fusil-Major, as well as two poses – aiming a shot, or leaning on their long fusil while bellowing orders to those below. The Ogor Warhulk also comes with a choice of heads – one with a helmet, the other left bare – and scenic basing elements, and can be built in two poses, with mace and shield held in either hand.
This kit comprises 42 plastic components, and is supplied with one Citadel 50mm Round Base. Also included is a Cities of Sigmar Transfer Sheet, featuring 410 Free City icons, Sigmarite cult sigils, and other forms of heraldry.
This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
$96.00
1 in stock
CONTRAST: LEVIATHAN PURPLE
Contrast is a revolutionary paint that makes beautiful painting simple and fast. Each Contrast paint, when applied over a light Contrast undercoat, gives you a vivid base and realistic shading all in a single application.
$13.00
7 in stock
AMMO BY MIG TERRAFORM - ASPHALT 100ML
With this new acrylic formulation made with natural minerals, AMMO has enabled you to authentically recreate a wide variety of textures, such as concrete, sand, asphalt, clay and ballast. This product, acrylic, non-toxic and odourless, is presented in 100 mL canisters. It dries completely within 24 hours and can be mixed with other similar products from our range of textures. It is suitable for any scale from 1/16 to 1/48.
$25.00
2 in stock
FLESH-EATER COURTS: GRAND JUSTICE GORMAYNE
Grand Justice Gormayne is the highest magistrate in all of Ushoran's ghoul kingdoms. He ensures that the Carrion King’s laws and edicts are followed – no matter how insane they may be – and those who transgress are punished with grisly fates. A cunning orator, Gormayne spurs his ghoulish ‘juries’ into a frothing rage, condemning foes to be bloodily torn apart.
This multipart plastic kit builds Grand Justice Gormayne, a horrifying vampiric arbiter of the Flesh-eater Courts. Swinging a gore-streaked gavel fashioned from well-gnawed bones, the Grand Justice calls for order and cracks unruly skulls. He pronounces judgement on Ushoran's enemies whilst dressed in what he believes to be the finest robes and wig of office, reading ancient laws from a ragged 'legal tome'.
This kit contains 10 plastic components and comes with a Citadel 32mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
$76.00
2 in stock
LAYER: TUSKGOR FUR
Citadel Layer paints are high quality acrylic paints that provide you with a huge range of colours and tones to choose from when you paint your miniatures. They are designed to be used straight over Citadel Base paints (and each other) without any mixing. By using several layers you can create a rich, natural finish on your models that looks fantastic on the battlefield.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin Citadel miniatures. One pot contains 12ml of layer paint.
$7.00
5 in stock
MARVEL CRISIS PROTOCOL: MORDO & ANCIENT ONE
Baron Karl Mordo learned his impressive magical ability by training with the Ancient One. He has long been one of Doctor Strange’s greatest foes. Baron Mordo has consorted with darker powers like Dormammu and the demon Mephisto in his efforts to destroy the Ancient One and the Sorcerer Supreme.
Born more than 500 years ago, the Ancient One was a mortal inhabitant of Kamar-Taj, a hidden mountain village. The Ancient One learned how to unlock the mystical power of the universe to work magic. Having seen firsthand the dangers of magic if used for personal gain, the Ancient One became the first Sorcerer Supreme. As one of the most powerful magic wielders in the world, the Ancient One has sworn to protect the world against evil magic and those who use it.
$75.00
1 in stock
MALIFAUX: GUILD: INTERNAL INVESTIGATION
Malifaux models are 32mm 'heroic' scale miniature made of high-quality plastic. Will require some preparation and assembly.
Faction: Guild
Keyword: Elite
Contents:
Alain Reid
Guild Investigator x2
False Witnesses x3
$85.00
1 in stock
HORUS HERESY: HEAVY WEAPONS UPGRADE SET – HEAVY FLAMERS / MULTI-MELTAS / PLASMA CANNONS
Key Features
Upgrade your MKVI Tactical Squad Legionaries to Heavy Support Squads
Incinerate enemies with 10 heavy flamers, slag tanks with 10 multi-meltas, and vaporise foes with 10 plasma cannons
Extra augury scanners for detecting foes
Heavy Support Squads provide the Legiones Astartes with mobile, infantry-portable firepower sufficient to bring down hordes of enemy troops or smash armoured vehicles apart with withering hails of fire, combining devastating armaments with all the flexibility of a footsoldier. Heavy flamers project a roaring torrent of burning promethium capable of incinerating infantry and flushing foes from cover, while multi-meltas reduce enemy tanks to molten slag with a flash of energy, and plasma cannons unleash volatile blasts of superheated matter.
This plastic upgrade kit can be used to equip Legionaries from the MKVI Tactical Squad set with powerful heavy weapons, suitable for use in a Legion Heavy Support Squad. The kit includes 10 heavy flamers, 10 multi-meltas, and 10 shoulder-mounted plasma cannons, along with arms suited to each weapon, allowing you to upgrade up to three Heavy Support Squads of 10 models, or six units of five models. Also included are four augury scanners which can be carried alongside a heavy weapon, allowing your Heavy Support Squads to detect and eliminate enemy units.
This upgrade kit comprises 160 plastic components and is designed to be assembled with the MKVI Tactical Squad set, which is sold separately. These components are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
$80.00
3 in stock