This Stainless Steel High Speed Drill Bit is to be used for drilling holes for the 0.50mm Brass Rods which are used for pinning miniatures. This pack contains 5pcs.   

This Stainless Steel High Speed Drill Bit is to be used for drilling holes for the 0.85mm Brass Rods which are used for pinning miniatures. This pack contains 5pcs.   

Modifx Side Cutters for modelling; - Really sharp points - long reach - durable return mechanism (not a spring) - suitable for both plastic and metal miniatures - affordable

This Vallejo Model Color Plastic Putty paint bottle contains 17ml of Vallejo Model Color Plastic Putty. A modelling paste which dries to a white, totally opaque, stone hard finish, Vallejo Model Color Plastic Putty is used principally for rebuilding or restructuring models and miniatures, for textures and high reliefs. For extra high relief the paste should be applied in layers, allowing each to dry before applying the next. If a more flexible paste is desired, mix with Gel Medium. Note: The actual paint colors may vary from the color swatches. We have tried to get as close as possible to the actual colors, but the swatches below will give you a good approximation of the true shades.

This Modifx Sculpting Set contains three (3) high quality stainless steel hobby sculpting tools. 

This Modifx Aluminium Paint Pallet set contains one (1) high quality Aluminium Paint Pallet. Aluminium paint pallets are preffered over plastic paint pallets becasue they can handle solvent based paints and can also be cleaned over and over again. 

This Modifx Modeling Drill Set contains; - one (1) high quality Pin Vice / Hobby Drill - six (6) Drill bits in a tidy plastic container, comprising: 1 x 2.0mm,1x 1.25mm, 2 x 0.85mm, 2 x0.5mm Also note there is a second part hidden in the handle, so suits 4 sizes of drill bit.

This Modifx Modimold blister pack contains five (5) sticks of Modimold.   Replicate any part you can get your hands on! 1) Immerse stick/s in hot water until soft 2) Remove stick/s for water and let excess water run off 3) Press the part you want to replicate into the soft Modimold 4) Leave to cool and harden 5) Carefully remove master part for the mold 6) Use Green Stuff or other putty to create duplicates   Tips and Tricks For single side molds (where one side of the part to be duplicated is flat, like a miniatures base. Use an ordinary flat kitchen tile. Put the piece to be duplicated on top, flat side on the tile. Push the Modimold around the piece.    For duel sided molds We found the easiest way to continually duplicate the piece is to make a little box (we made ours out of lego) with no top or bottom, just slightly bigger than the piece to be duplicated. Start by just duplicating the bottom half of the piece, let it harden then put the Modimold on top to duplicate the top half. The box makes it much easier to locate the two molds continually. The most difficult process is working out how much putty to put into each side of the mold. 

All- in-one sanding and polishing stick suitable for plastic miniatures! Contents: 1 sanding stick (180mm x 19mm x 3mm). Comprising three fine grits (colour coded), these will enable you to remove mould lines or joint fill, to a mirror finish*. With a plastic core they are flexible and able to be cut down to smaller pieces if you have tight places to reach. The grit is finer than standard nail file/emery board which can burr/scratch plastic parts. *The picture attached of the storm cast was a two piece shoulder pad with the join straight down the middle! Using a bit of excess glue, cut back and filed to get a finish like there was never a join there to begin with. 

This AK Interactive Stainless Steel Shaker Balls pot contains two hunderd and fifty (250) AK Interactive stainless steel paint agitators. Stainless steel balls to use with all enamel paints, primers, and acrylics. Add to your jar and shake, to help mix your paint quicker. Contains 250 steel balls, at a very low price.

100pcs of 2.00mm/Diameter x 1/5mm Thick Rare Earth Magnets, as pictured. Miniature and Model Manufacturers now produce fantastic multi-part plastic kits with pleanty of weapon and head options. What better way to get the most out of your new set than to create miniatures that can be tailored to the army you are facing by interchanging weapons. Or maybe you would just like to be able to change the pose of a miniature. Rare Earth Magnets are one of the most powerful magnets in the world and due to their tiny size and super strength these magnets are ideal for conversions from the smallest weapons to the biggest Titan Arms.   Tips & Tricks Plan Your Conversion - For more complex conversions, sketch your idea onto paper first. Rough-Up the Magnets - The magnets are supplied with a high quality coating. We recommend roughing up the surface of the magnet with a Model File or Sand Paper where it will be glued to your model. This will make for a stronger and longer lasting conversion. Check The Polarity - The magnets have a north and south polarity. Double check the polarity before glueing anything to your models. Once the magnets are glued in it can be a nightmare trying to remove them.

50pcs of 2.00mm/Diameter x 1/5mm Thick Rare Earth Magnets and one Drill Bit, as pictured. Miniature and Model Manufacturers now produce fantastic multi-part plastic kits with pleanty of weapon and head options. What better way to get the most out of your new set than to create miniatures that can be tailored to the army you are facing by interchanging weapons. Or maybe you would just like to be able to change the pose of a miniature. Rare Earth Magnets are one of the most powerful magnets in the world and due to their tiny size and super strength these magnets are ideal for conversions from the smallest weapons to the biggest Titan Arms.   Tips & Tricks Plan Your Conversion - For more complex conversions, sketch your idea onto paper first. Rough-Up the Magnets - The magnets are supplied with a high quality coating. We recommend roughing up the surface of the magnet with a Model File or Sand Paper where it will be glued to your model. This will make for a stronger and longer lasting conversion. Check The Polarity - The magnets have a north and south polarity. Double check the polarity before glueing anything to your models. Once the magnets are glued in it can be a nightmare trying to remove them. (MFX-MAG-200A)

50pcs of 3.00mm/Diameter x 1/5mm Thick Rare Earth Magnets and one Drill Bit, as pictured. Miniature and Model Manufacturers now produce fantastic multi-part plastic kits with pleanty of weapon and head options. What better way to get the most out of your new set than to create miniatures that can be tailored to the army you are facing by interchanging weapons. Or maybe you would just like to be able to change the pose of a miniature. Rare Earth Magnets are one of the most powerful magnets in the world and due to their tiny size and super strength these magnets are ideal for conversions from the smallest weapons to the biggest Titan Arms.   Tips & Tricks Plan Your Conversion - For more complex conversions, sketch your idea onto paper first. Rough-Up the Magnets - The magnets are supplied with a high quality coating. We recommend roughing up the surface of the magnet with a Model File or Sand Paper where it will be glued to your model. This will make for a stronger and longer lasting conversion. Check The Polarity - The magnets have a north and south polarity. Double check the polarity before glueing anything to your models. Once the magnets are glued in it can be a nightmare trying to remove them. (MFX-MAG-300A)

60pcs of 10.0mm/Diameter x 1.0mm Thick Rare Earth Magnets. *New size Feb 2021*, we have changed from 2mm thick to 1mm thick, but now twice as many! Better for magnetising bases since the magents are thin but strong.If you need the higher strength glue 2 or more together on each side :) Miniature and Model Manufacturers now produce fantastic multi-part plastic kits with pleanty of weapon and head options. What better way to get the most out of your new set than to create miniatures that can be tailored to the army you are facing by interchanging weapons. Or maybe you would just like to be able to change the pose of a miniature. Rare Earth Magnets are one of the most powerful magnets in the world and due to their tiny size and super strength these magnets are ideal for conversions from the smallest weapons to the biggest Titan Arms.   Tips & Tricks   Plan Your Conversion - For more complex conversions, sketch your idea onto paper first. Rough-Up the Magnets - The magnets are supplied with a high quality coating. We recommend roughing up the surface of the magnet with a Model File or Sand Paper where it will be glued to your model. This will make for a stronger and longer lasting conversion.   Check The Polarity - The magnets have a north and south polarity. Double check the polarity before glueing anything to your models. Once the magnets are glued in it can be a nightmare trying to remove them.   (MFX-MAG-100)

This Modifx Hobby Tweezers Set contains four (4) Hobby Tweezers. Four tweezers perfect for your hobby needs. Along with the traditional tweezers, this set also includes "reverse tweezers" the tool of choice for decal work. Angle head tweezers for tight spaces and flat head tweezers for large parts are also part of this versatile set. The Modifx hobby tool range provides the miniature modeler, collector and gamer with all of the indispensable tools and supplies needed for every project. From basic assembly and cleaning of your new miniatures to master level conversions, our range has the tool that’s right for you! Never before has a hobby tool range combined such versatility, quality and affordable prices.

All highly quality detailed Printed resin Bases fully compatible with our Magnetised Movement trays  Size Options; 32mm (10 pack) Tiny Terra Scenery obtains Commercial rights to sell Physical copies of Thematic Bases designed by Txarli Factory

All highly quality detailed Printed resin Bases fully compatible with our Magnetised Movement trays  Size Options; 40mm (5 pack) Tiny Terra Scenery obtains Commercial rights to sell Physical copies of Thematic Bases designed by Txarli Factory

All highly quality detailed Printed resin Bases fully compatible with our Magnetised Movement trays  Size Options; 50mm (2 pack) Tiny Terra Scenery obtains Commercial rights to sell Physical copies of Thematic Bases designed by Txarli Factory

All highly quality detailed Printed resin Bases fully compatible with our Magnetised Movement trays  Size Options; 60mm (1 pack) Tiny Terra Scenery obtains Commercial rights to sell Physical copies of Thematic Bases designed by Txarli Factory

All highly quality detailed Printed resin Bases fully compatible with our Magnetised Movement trays  Size Options; 80mm (1 pack) Tiny Terra Scenery obtains Commercial rights to sell Physical copies of Thematic Bases designed by Txarli Factory