MICRO SET

Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils in new paint and converts the adhesive on the back of the decal to a stronger and longer lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model's surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called "painted on look." To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper toweling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin or Gloss.

$15.00
8+ in stock

Related Products

NECROMUNDA: ORLOCK ARMS MASTERS AND WRECKERS

Expand your Orlock gang with these six fighters alongside their faithful and deadly cyber companions. The Wreckers are armed with a selection of pistols, knives, and demolition charges. They come with a groove stem so that they can be assembled to give the impression that they are airborne. Either Arms Master can be armed with a combat shotgun, or they can don a full servo harness and carry a deadly arc hammer into battle. Both Cyber-mastiffs are modelled running forward, hunting down their underhive prey. This 120-part plastic kit makes two Arms Masters, two Cyber-mastiffs, and four Wreckers. It comes supplied with four 25mm round Necromunda bases, four 32mm round Necromunda bases, and a 45mm groove stem set. Rules for using these models in games of Necromunda can be found in Necromunda: House of Iron.
$95.00
1 in stock

WARRIORS OF CHAOS: CHAOS WARRIORS

This multipart plastic kit builds 16 Chaos Warriors, heavy infantry for your Warriors of Chaos armies in games of Warhammer: The Old World. They can be assembled as 1 large unit, or two smaller units of 8, each with a full command section. Fully encased in heavy armour and tall shields, they are incredibly hard to kill. They march implacably across the field of battle, putting an assortment of heavy hand weapons to murderous use when they reach the foe's front lines. The miniatures in this box are easy to customise. There are 16 heads, 32 shoulder pads, 16 shields, and 14 hand weapons to choose from, which are all interchangeable across the Chaos Warriors. You'll also find components for 2 champions, musicians, and standard bearers if you choose to build them. Contents:– 206 plastic components– 16 Citadel 30mm Square Bases– 1 construction guide These miniatures require assembly and are supplied unpainted. 
$159.00
2 in stock

BLOOD BOWL: TOMB KINGS TEAM PITCH & DUGOUTS

This set contains a double-sided, fold-out card Blood Bowl pitch depicting the home stadium of a Tomb Kings team. One side features an expansive, royal room within the ancient tomb of a Nehekharan of high standing, transformed into a pitch. The other side shows what happens when the Nehekharan noble is awoken from their slumber by all the ruckus. You'll also find a pair of matching double-sided Dugouts to complete the theme. Each Dugout features score, turn, and Re-roll trackers, plus Reserves, Knocked-out, and Casualty boxes. The pitch measures 906mm by 538mm when fully opened, with reinforced folds, wrapped edges, and a matte laminate finish. The two Dugouts each measure 302mm by 135mm. Rules for using each side of the pitch in your games of Blood Bowl are included – you can also find these rules in Spike! Journal: Issue 20 or in the Tomb Kings Team Reference Card Pack, both of which are available separately.
$104.00
2 in stock

DWARFEN MOUNTAIN HOLDS: DWARF MINERS

This multipart plastic kit builds 20 Dwarf Miners and four Miner's Carts, tunnelling fighters from the Dwarfen Mountain Holds. Each of these doughty excavators is clad in heavy chainmail and carries a mining pick to crack open enemy armour. This kit also provides all the command upgrades you'll need, whether you choose to field your Dwarf Miners in small groups or as one large host – you can build musicians, champions who can optionally be armed with a steam drill, and standard bearers with a choice of icon or banner. The rugged Miner’s Carts are drawn by sturdy ponies, which can be mounted with optional drills of their own. This kit contains 248 plastic components, 20x Citadel 25mm Square Bases, and 4x Citadel 50mm x 75mm Rectangular Bases. Also included is 1x Dwarfen Mountain Holds transfer sheet, containing 342 high-quality waterslide transfers for you to decorate your army. These miniatures are supplied unassembled and unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.
$118.00
1 in stock

AELDARI: DARK REAPERS

This kit builds one unit of Dark Reapers armed with reaper launchers, complete with their Exarch who can be built with a reaper launcher, shuriken cannon, aeldari missile launcher, or tempest launcher. The Exarch can be built holding a skull in their off-hand, and has a choice of four heads, while each Dark Reaper has a choice of helmeted or unhelmeted heads. Also included is a small miniature representing a Dark Reaper shrine. This set comprises 82 plastic components and is supplied with 5x Citadel 28.5mm Round Bases and 1x Citadel 25mm Round Base. These miniatures are supplied unpainted and require assembly.
$113.00
1 in stock

THE HOLLOW KING (PB)

A Cado Ezechiar Novel In his first full-length novel, the vampiric anti-hero Cado Ezechiar finds himself caught in a web of war and deceit in the city of Aventhis. READ IT BECAUSEThe cold-hearted Cado Ezechiar is obsessed with revenge and keeping to his strict moral code – can he stay true to himself and avenge those he has lost? THE STORYCado Ezechiar is a wanderer who has outlived the memory of the age that made him. A Soulblight vampire who accepted the curse as his people and kingdom fell to Chaos, he now roams the Realm of Death and beyond seeking retribution and salvation for the ones he failed. Aided by the bound spirits of those he lost, Cado follows a path of revenge, hunting the servants of Chaos to slake his need for blood while seeking the Sorcerer of Change who destroyed his kingdom. When his hunt leads him to the free city of Aventhis, Cado becomes caught up in the machinations of greater powers – beings who see the city and its people as dust in the eyes of ambitious gods. Torn between his code of honour and his desire for vengeance, Cado must navigate a web of war and deceit, or lose everything. Written by John French
$24.00
1 in stock
Save 8%

DEFINITION SYNTHETIC BRUSH SET: SIZES 4/0, 3/0, 2/0

Vallejo - Brush Set - Detail - Definition Set - Synthetic fibers (Sizes 4/0, 3/0 & 2/0)
$22.00 $24.00
5 in stock

MALIFAUX: GUILD - ICONIC - THE PATH NOT TAKEN - LADY JUSTICE

The Path Not Taken features Lady Justice if she followed down the path of necromancy and embraced the Grave Spirit’s malignant power. In doing so, the scales of balance tipped, and she surpassed her greatest enemy, Nicodem, essentially becoming him in the process. This Iconic box includes this incredible “what if” scenario art piece of Lady Justice sculpt standing 97mm tall that will look fantastic painted up and showcased on your shelf. This model will come unassembled in hard PVC so that the fine details will be kept without the complexity of building a large model. Additionally, a preassembled playable version of the sculpt will also be included so that you can field a smaller version of this iconic character in your next game of Malifaux. An M3E stat card for the original Lady Justice will also be included.
$100.00
1 in stock

MALIFAUX: TEN THUNDERS: DEVOTED STUDENTS

Malifaux models are  32mm 'heroic' scale miniature made of high-quality plastic. Will require some preparation and assembly.   Faction: Ten Thunders   Keyword: Monk   Contents:   Low River Monks x3 Wondering River Monks x3
$65.00
2 in stock