ORKS: MEGATRAKK SCRAPJET
Key Features
- The pride and joy of a downed Flyboy – a fuselage covered in weapons!
- Armed with big shootas and a nose drill, designed to ram happily into enemy lines
A favourite amongst Speed Freeks and grounded Flyboyz alike, Megatrakk Scrapjets provide rocket-propelled acceleration, impressive firepower and the hilarity of ramming into enemy lines at the helm of what is effectively a gigantic, thrust-driven drill. These vehicles allow former Ork pilots to revel in the dimly-remembered joy of mowing down enemies at point-blank range – a joy which, of course, often caused the Flyboy to crash in the first place. Explosions blossom amidst the enemy as rokkits and missiles collide with their targets, while Grot tail-gunners blaze away with chattering big shootas – the array of weaponry welded, bolted, riveted and lashed onto a Megatrakk Scrapjet is fearsome.
This multipart plastic kit contains the components necessary to assemble a Megatrakk Scrapjet. Built around the fuselage of a downed Ork aircraft, the Scrapjet is pretty much a metal tube covered in things that make enemies die – a front-mounted rokkit kannon (with belt-fed rokkits!), missiles which can be modelled mid-launch, a drill attached to the front turbine with accompanying spiked rams, a twin big shoota at the front and another twin big shoota crewed by a Grot rear gunner. While the wings have been broken off in whatever terrible accident grounded the Scrapjet, it’s still covered in fins and ailerons – after all, they look cool, and that’s what being a Flyboy is all about! The pilot himself is decked out in a flight jacket, goggles and a long scarf billowing out behind him, seated in a cockpit full of instruments (which he is, of course, ignoring). The Scrapjet is propelled by a huge jet exhaust at the back, which pushes the vehicle along via the tracked wheels attached to the rear.
This kit comes as 65 components and is supplied with a Citadel 150mm Oval base.
$88.00
1 in stock
Related Products
LAYER: STRAKEN GREEN
Citadel Layer paints are high quality acrylic paints that provide you with a huge range of colours and tones to choose from when you paint your miniatures. They are designed to be used straight over Citadel Base paints (and each other) without any mixing. By using several layers you can create a rich, natural finish on your models that looks fantastic on the battlefield.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin Citadel miniatures. One pot contains 12ml of layer paint.
$7.00
7 in stock
BATTLETOME: MAGGOTKIN OF NURGLE (AOS 3)
Key Features
A vital accompaniment for your Maggotkin forces
Contains everything you need to know to corrupt the realms
Bloated with essential background information and art
To the tolling of rusted bells, the Maggotkin bring disease and despair to the realms. Revolting worshippers of Nurgle, the Chaos God of plagues and entropy, they live to bring others into his fold by sharing with them his foul gifts. Given strength by the maladies that blight their flesh, the Maggotkin serve Grandfather Nurgle with furious zeal. Armies of infected mortals fight alongside droning plague-daemons, spreading pestilence to all and sundry. They would not see the realms burn, however. Instead, they seek to transform them into reeking, squelching extensions of Nurgle’s Garden, writhing and pulsating with disgusting life.
In this book, you'll learn everything there is to know of the foul pestilences of Nurgle and his corrupted followers who wage war with rusted weapons and diseased touch. Discover the garden of Nurgle and Grandfather's never-ending quest to extend his rotting gifts across the whole of the Mortal Realms, as well as the feculent legions that march out to spread entropy and decay.
This 104-page hardback book contains:
- A pestilent bounty of lore and background information all focussed on Grandfather Nurgle and the daemons and mortals that live only to spread his poxes
- Stunning art that covers the repulsive Maggotkin hordes in all their bubonic beauty
- 27 warscrolls and pitched battle profiles that cover everything from the mighty Glottkin brothers to the rotting Putrid Blightkings and the lowliest Nurglings
- Allegiance abilities for your Maggotkin armies that cover how your forces infect their enemies with diseases, how to manage Cycle of Decay, as well as command traits, artifacts of power, and the 6 legions and contagiums of Nurgle
- 7 warscroll battalions for Path to Glory narrative campaigns
- Path to Glory campaign rules allowing you to undertake quests to seed the garden of Nurgle and fight across blighted battlegrounds
- Content for matched play, including 4 grand strategies, 6 battle tactics, and 2 core battalions
- A wonderful photo showcase covering the menagerie of morbid miniatures which make up Maggotkin armies, and guides for how to paint your own army
- Background information on every Maggotkin of Nurgle unit, including characters like Rotigus, and Horticulus Slimux
$89.00
1 in stock
LEGIONS IMPERIALIS: QUESTORIS KNIGHTS
The Knight Questoris is the most common suit of Knight Armour extant in the Imperium during the Age of Darkness, serving as the mainstay of Household forces and configured with a myriad of different armaments. Questoris Knights are frequently fielded in Lances, consisting of multiple noble Scions operating in concert.
This multipart plastic kit builds three epic scale Questoris Knights. Each of these machines can be armed with a variety of destructive weapons, from reaper chainswords and thunderstrike gauntlets for close combat, to thermal cannons, rapid fire battlecannons, avenger gatling cannons, rocket pods, and a choice of hull-mounted heavy stubbers and meltaguns. Each of these options allows you to use your Knights differently in battle, stripping shields from enemy Titans, hunting opposing Knights, or demolishing enemy infantry and armour.
These models can be used in games of Legions Imperialis, as well as games of Adeptus Titanicus using the included Adeptus Titanicus Command Terminal.
The set includes:
- 1x rapid fire battlecannon with heavy stubber- 1x thermal cannon- 1x avenger gatling cannon- 3x left-handed thunderstrike gauntlets- 3x right-handed thunderstrike gauntlets- 3x rocket pods- 3x reaper chainswords- 3x heavy stubbers- 3x meltaguns- 6x heads- 3x tilting plates- 3x Legions Imperialis 40mm Round Bases- 1x Adeptus Titanicus Knight Houses transfer sheet- 1x Adeptus Titanicus Questoris Knight Command Terminal
These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
Please note that the bases in this kit may differ from those shown in product imagery.
$80.00
2 in stock
NECROMUNDA: ESCHER CUTTERS
Key Features
Seize the skies for your Escher gang with four Cutter jetbikes
Slice through enemies with dizzying speed and toxic gas traps
Customise your ride with a choice of guns, heads, and hairstyles
Cutters are fast, agile jetbikes, reflecting House Escher's preference for deadly speed over brutish durability. Borne across the skies of the ash wastes by a staggeringly powerful engine, Cutters are seldom the stablest or safest of rides – but leave any rivals choking on clouds of dust and trails of corrosive chem-exhaust. Soaring over obstacles and barricades, a descending Cutter can slice through the enemies of the House of Blades with a hail of gunfire, then jink away before the foe can respond.
This multipart plastic kit builds four Escher Cutters, lightning-fast jetbikes that can be added to any Escher gang. These ferocious flying machines boast a powerful front turbine with exposed engine cylinders, providing thrust for their sleek, bladed chassis. Each Cutter has a deadly gas trap launcher installed on its undercarriage, and sports a pair of mounted weapons on either side of the jetbike – you can choose between twin-linked grenade launchers, twin-linked heavy stubbers, or twin-linked plasma guns. The kit includes a choice of two different head designs and four interchangeable hairstyles, to give each of your Escher riders their own distinct appearance.
This set consists of 124 plastic components, and is supplied with 4x Citadel 60x35mm Oval Bases, each with a ball top flying stem. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
Rules for using Escher Cutters in your games of Necromunda can be found in The Aranthian Succession: Cinderak Burning supplement.
$86.00
1 in stock
AIR: THE FANG
Air paints pair seamlessly with the rest of the Citadel Colour range, featuring a thinner formulation that makes them work perfectly with your airbrush.
$13.00
3 in stock
LAYER: SOTEK GREEN
Citadel Layer paints are high quality acrylic paints that provide you with a huge range of colours and tones to choose from when you paint your miniatures. They are designed to be used straight over Citadel Base paints (and each other) without any mixing. By using several layers you can create a rich, natural finish on your models that looks fantastic on the battlefield.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin Citadel miniatures. One pot contains 12ml of layer paint.
$7.00
1 in stock
FLESH-EATER COURTS: ROYAL DECAPITATOR
Royal Decapitators are the unholy executioners of the Flesh-eater Courts, viewed with unease even by fellow ghouls – more than hunger or duty, they care only for the dealing of death. Dragging huge, tarnished axes behind them, the Royal Decapitators serve their lieges as gibbering executioners, and delight in taking worthy heads.
This multipart plastic kit builds a Royal Decapitator, a ghoulish headsman who serves the royalty of the Flesh-eater Courts. The Decapitator cleaves through the necks of the mightiest opponents with a massive, rusted axe, driving ghouls around them into a frenzy of slaughter. This kit offers a choice of two different heads – one strung with bone trinkets, the other masked by a grim executioner's hood.
This kit contains nine plastic components and a Citadel 32mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
$67.00
3 in stock
MESBG: THE THREE HUNTERS
When the Fellowship of the Ring was broken at Amon Hen, Aragorn, Legolas and Gimli chose to pursue the Uruk-hai who had abducted the Hobbits Merry and Pippin. These Three Hunters tracked the enemy to Rohan, where they fought alongside King Théoden at Helm's Deep, before turning to ancient paths in search of allies – and Aragorn's destiny.
During the Battle of Pelennor Fields, they arrived at the Docks of Harlond when things seemed darkest for the White City, leading the Army of the Dead – and with them came victory for the Men of the West.
This plastic kit builds three Citadel miniatures representing Aragorn, Legolas and Gimli, the Three Hunters, as they appeared at the docks of Harlond in The Lord of the Rings: The Return of the King™.
The Three Hunters are a great addition to any Good army, providing hard-hitting power both up close and at range. Aragorn's inexhaustible Might resource and sword Andúril make him a potent asset, while Legolas' unerring accuracy with his bow and Gimli's wide range of attacks are tremendous support. Together, the three can take on many times their number in enemies.
Also included in the set is a plastic priority marker. One side features an icon representing the Three Hunters, featuring each of their weapons. On the other side is the Eye of Sauron. This can be used to mark who has priority in each game turn.
This multipart plastic kit comes in 27 components to build three miniatures plus a priority marker. It also includes 3 25mm round bases.
Aragorn is armed with the sword Andúril, Flame of the West. He is running forward ready to strike, and wears an Elven cloak over his Ranger garb.
Legolas is striding forward firing his Elven bow with unerring accuracy. He wears an Elven cloak over his forest-hued clothing.
Gimli is marching menacingly towards the foe, a double-handed axe ready to cleave some Orc heads. In addition, his iconic two-headed axe is stowed on his back and he carries a brace of throwing axes. He wears an Elven cloak in addition to his layers of armour.
$80.00
1 in stock
LAYER: HOETH BLUE
Citadel Layer paints are high quality acrylic paints that provide you with a huge range of colours and tones to choose from when you paint your miniatures. They are designed to be used straight over Citadel Base paints (and each other) without any mixing. By using several layers you can create a rich, natural finish on your models that looks fantastic on the battlefield.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin Citadel miniatures. One pot contains 12ml of layer paint.
$7.00
3 in stock